Concrete Wire Mesh
Dimensions:
Bar diameter : 3,4 – 10,0 mm
Bar surface : Ribbed, plain or hot dip galvanized after welding
Spacing (mm) : 75 x 100 – 100 x 100 – 150 x 150 – 200 x 200 – 250 x 250
Mesh dimension : width 50 – 250 cm – length 50 – 600 cm
Mechanical Specifications:
Minimum yield point: 500 N/mm2
Minimum tensile strength: 550 N/mm2
Minimum elongation at break: 5-8 %
Raw material: SAE 1008,1010 quality wire rods are used.

Standarts: DIN488,TSE 4559 and other international standards

Special Wire Mesh
Dimensions:
Bar dimension: 3,4 – 10,0 mm
Bar surface : Ribbed, plain or hot dip galvanized after welding
Spacing (mm) : 50 x 75 – 75 x 75 – 50 x 100 – 50 x 150 – 100 x 100
Wire dimension : Width 50 – 250 cm – Length 50 – 600 cm
Other wire mesh dimensions or spacing can be provided as per order.
Mechanical Specifications:
Minimum yield point : 500 N/mm2
Minimum tensile strength : 550 N/mm2
Minimum elongation at break : 5-8 %
Raw Material : SAE 1008,1010 quality wire rods are used.

Standarts: DIN488,TSE 4559 and other international standards.

Galvanized Wires

Hot Dip Galvanized Steel Wires for General Purposes
Raw Material : Low, Medium and High Carbon Wire Rod (max.0,75%C)
Diameter Range : 0,80mm – 6,00mm
Coating Thickness : 30gr/m² – 350gr/m²
Wire Grades : GR 34-GR65-GR85-GR105-GR125-GR145

Related Standarts: ISO EN 10 244,2 – ASTM A461

Zinc Coated Wire for the Energy Sector
Coating Thickness : According to above mentioned standards
Wire Grades : GR 34-GR65-GR85-GR105-GR125-GR145
Product Range : a) Round wires 0,80 – 6,00mm b) Flat wires from 4,00×0,80mm to 9.00×3.00 mm

Cold Drawn Bars & Coils
Diameter: 3,4 – 50 mm
Length: 1 – 12 m

Standarts: ASTM, BS, EURONORM, AFNOR, DIN488, TSE

Black Annealed Wires
Diameter: 1,1 mm- 6 mm

Standarts: EN 10270-1, ASTM and other international norms

Low Carbon Wires
Wire diameter: 1.00 – 10.00 mm
Tensile strength: 450 – 900 N/mm2
Raw Material: SAE 1006, 1008, 1010 quality wire rods are used

Standarts: DIN, ASTM and other international standards

PVC Coated Wires
Coating Type: Extrusion
Coating Thickness: 0,50 – 1,20mm
Core Wire: Galvanized low carbon steel wire
Core Wire Diameter: 1,50 – 3,80mm
Diameter After Coating: 2,50 – 5,00mm

Straightened and Cut Wires
Product : Material can be either hot dip galvanized and then straightened and cut to length or just bare wire straightened and cut to length
Diameter  Range: 1,80 – 6,00mm
Length: 180 – 4000mm

Wet Drawn Wire

Barb Wires

Chain Link Fence Wire

Oiled Baling Wire

Road wires 5,5 mm – 12 mm